BT4010
USER MANUAL
Thank you
thank you for purchasing the Jabra bt4010 bluetooth® headset.
We hope you enjoy it! this instruction manual will get you started
and ready to make the most of your headset.
abouT your Jabra bT4010
PLEASE NOTE: Before using your new Jabra BT4010 headset,
you must fully charge it and set it up by ‘paring it’ with your
selected Bluetooth device.
1
LCD display
With battery, bluetooth and call indicator
2
Answer/End button
press and hold to turn the headset on and off
tap to answer/end a call
3
4
5
Charger socket
Volume up/Volume down
Earhook
3
2
1
4
5
Jabra bt4010
2
WhaT your headseT can do
Your Jabra BT4010 lets you do all this:
-
-
-
-
-
-
-
answer calls
end calls
reject calls*
voice dialing*
last number redialing*
call waiting*
put call on hold*
LCD Display
-
-
-
battery status
bluetooth connection status
call status
Specifications
-
-
talk time up to 6 hours/standby time up to 150 hours
rechargeable battery with charging option from ac power
supply. alternative charger options pc via usb cable or car
charger (not included)
-
-
-
-
lcd display for status and battery indicator
size: l 49 mm x W 17 mm x d 27,9 mm
Weight 10 grams
Qualified for bluetooth specification version 2.0 + edr
(enhanced data rate), supporting headset and hands-free
profiles for phone conversations
-
-
-
e-sco for enhanced audio quality
28 bit encryption
operating range up to 10 meters (approx. 33 feet)
* phone dependent
Jabra bt4010
3
using your Jabra bT4010
the Jabra bt4010 is easy to operate. the answer/end button on
the headset performs different functions depending on how long
you press it.
Instruction
tap
Duration of press
press briefly
double tap
press
2 quickly repeated taps
approx: 1 seconds
press and hold
approx: more than 3 seconds
hoW The display Works
bluetooth Indicator
battery Icon
call Indicator
No battery
headset on,
battery
status shown
indicator:
less than 10 min.
talk time
headset off
No bluetooth icon:
not connected to
phone
connected to
phone
In pairing mode
No call indicator:
Incoming or
outgoing call
no call
current call
Jabra bt4010
4
1. Charge your headset
make sure that your Jabra bt4010 headset is fully charged before
you start using it. use the ac adaptor to charge from a power
socket. your headset indicates the charging level while charging:
What you see
What you see
less than 30%
between 30 - 70%
more than 70%
Fully charged
1st battery level flashing
2nd battery level flashing
3rd battery level flashing
all battery levels on, no
flashing
please note: the lifetime of the battery will be significantly
reduced if your device is left uncharged for a long period. We
therefore recommend that you recharge your device at least once
a month.
Turning your headset on and off
-
press and hold the answer / end button to turn on your
headset. the lcd display will show the battery status to
indicate the headset is on.
-
press and hold the answer / end button to turn off your
headset until you see the indicator turn off in the lcd display.
Pairing the headset with your phone
before you use your Jabra bt4010, you need to pair it with your
mobile phone.
1. your headset will automatically go into pairing mode when you
turn it on the first time, and you will see the bluetooth indicator
flashing in the lcd display.
2. set your bluetooth phone to‘discover’the Jabra bt4010.
Follow your phone’s instruction guide. this usually involves
going to a‘setup,’‘ connect’or‘bluetooth’menu on your phone
and selecting the option to‘discover’or‘add’a bluetooth
device.*
Jabra bt4010
5
3. your phone will find the Jabra bt4010.
your phone then asks if you want to pair with it. accept by
pressing ‘yes’or‘ok’on the phone and confirm with the
passkey or pIn = 0000 (4 zeros). your phone will confirm when
pairing is complete.
In case of unsuccessful pairing, repeat steps 1 to 3.
Manual pairing
you can manually put your Jabra bt4010 into pairing mode, if you
want to pair with a second phone or bluetooth device:
1. make sure the headset is off.
2. press and hold the answer / end button for approx 5 sec. until
the bluetooth indicator on the lcd display starts flashing.
3. set your bluetooth phone to discover your headset as
described above.
Wearing sTyle
the Jabra bt4010 ready to be worn without an earhook – simply
insert it into your right or left ear with the headset pointing
towards your mouth. If you prefer to use the earhook, click it on as
shown in the illustration.
For optimal performance, wear the Jabra bt4010 and your mobile
phone on the same side of your body or within line of sight .
In general, you will get better performance when there are no
obstructions between your headset and your mobile phone.
Jabra bt4010
6
hoW To
Answer a call
-
tap the answer/end button on your headset to answer a call.
End a call
-
tap the answer/end button to end an active call.
Make a call
-
When you make a call from your mobile phone, the call will
(subject to phone settings) automatically transfer to your
headset. If your phone does not allow this feature, tap on the
Jabra bt4010’s answer/end button to transfer the call to the
headset.
Reject a call *
-
press the answer/end button when the phone rings to reject an
incoming call. depending on your phone settings, the person
who called you will either be forwarded to your voice mail or
you will hear a busy signal.
Activate voice dialing*
-
press the answer/end button. For best results, record the voice-
dialing tag through your headset. please consult your phone’s
user manual for more information about using this feature.
Redial last number *
-
double tap the answer/end button when the headset is on and
not used.
Adjust sound and volume *
tap the volume up or down to adjust the volume.
-
Call waiting and placing a call on hold*
this lets you put a call on hold during a conversation and answer
a waiting call.
-
press the answer/end button once to put the active call on hold
and answer the waiting call.
-
-
press the answer/end button to switch between the two calls.
tap the answer/end button to end the active conversation.
* phone dependent
Jabra bt4010
7
Battery Indicator
When the Jabra bt4010 is turned on, you will always know the
battery level from the lcd display.
What you see
3 battery levels
2 battery levels
1 battery levels
Battery level/Talk time
between 4-6 hours talk time
between 2-4 hours talk time
less than 2 hours talk time
TroubleshooTing & FaQ
I hear crackling noises
-
bluetooth is a radio technology, which means it is sensitive to
objects between the headset and the connected device. It is
designed for the headset and the connected device to be used
within 33 feet (10 meters) of each other, with no major objects
in the way (walls, etc.).
I cannot hear anything in my headset
-
-
-
Increase the volume in the headset
ensure that the headset is paired to a device that is playing
make sure your phone is connected to the headset by checking
the lcd display to see if the bluetooth indicator is on. you can
connect to the headset by tapping the answer/end button.
I am having pairing problems
-
you may have deleted your headset pairing connection in your
mobile phone.
Follow the pairing instructions.
I want to reset the headset
It is possible to reset and test the headset by ’press and hold’
answer/end + volume down at the same time. all the indicators in
the display will start flashing. In this mode, the pairing list is reset
the headset will automatically turn off after approx. 10 seconds.
the next time you power on, the headset will go into pairing
mode as the first time you powered your new bt4010 on.
Jabra bt4010
8
Will the Jabra BT4010 work with other Bluetooth equipment?
-
the Jabra bt4010 is designed to work with bluetooth mobile
phones. It can also work with other bluetooth devices that are
compliant with bluetooth version 1.1 or higher and support a
headset and/or hands-free profile.
I cannot use Reject call, call on hold, Redial or voice dialling
these features are dependent on the ability of your phone to
support a hands-free profile. even if the handsfree profile is
implemented reject call, call hold and voice dialing are optional
features which are not supported by all devices. please consult
your device manual for details.
The device is not connected to my headset in time to answer
an incoming call
If the headset is off and is turned on when a call is incoming, the
device and headset might not connect in time for the call to be
answered. In order to avoid such inconveniences please keep the
headset on, in range and connected.
need more help?
1. Web:
(for the latest support info and online user manuals)
2. E-mail:
3. Phone:
tech support: techsupp@jabra.com
Information: info@jabra.com
1 (800) 327-2230 (toll-free in usa)
(603) 579-5311 (canada)
Taking care oF your headseT
-
always store the Jabra bt4010 with the power off and safely
protected
-
avoid storage at extreme temperatures (above 45°c/113°F
– including direct sunlight – or below -10°c/14°F). this
can shorten battery life and may affect operation. high
temperatures may also degrade performance.
-
do not expose the Jabra bt4010 to rain or other liquids.
Jabra bt4010
9
Warning!
headsets are capable of delivering sounds at loud volumes
and high pitched tones. exposure to such sounds can result
in permanent hearing loss damage. the volume level may
vary based on conditions such as the phone you are using, its
reception and volume settings, and the environment. please read
the safety guidelines below prior to using this headset.
Safety guidelines
1. Prior to using this product follow these steps:
-
before putting on the headset, turn the volume control to its
lowest level,
-
-
put the headset on, and then
slowly adjust the volume control to a comfortable level.
2. During the use of this product
-
keep the volume at the lowest level possible and avoid using
the headset in noisy environments where you may be inclined
to turn up the volume;
-
-
If increased volume is necessary, adjust the volume control
slowly; and
If you experience discomfort or ringing in your ears,
immediately discontinue using the headset and consult a
physician.
With continued use at high volume, your ears may become
accustomed to the sound level, which may result in permanent
damage to your hearing without any noticeable discomfort.
using the headset while operating a motor vehicle, motorcycle,
watercraft or bicycle may be dangerous, and is illegal in some
jurisdictions. check your local laws. use caution while using your
headset when you are engaging in any activity that requires your
full attention. While engaging in any such activity, removing the
headset from your ear area or turning off your headset will keep
youfrom being distracted, so as to avoid accident or injury.
3. Keep out of reach of children:
-
the plastic bags the product and its parts are wrapped in are
not toys forchildren. the bags themselves or the many small
parts they contain may cause choking if ingested. never try to
dismantle the product yourself.
Jabra bt4010
10
none of the internal components can be replaced or repaired by users.
only authorised dealers or service centres may open the product.
If any parts of your product require replacement for any reason,
including normal wear and tear or breakage, contact your dealer.
avoid exposing the product to rain or other liquids.
4. ACA TS028 – Ignition of flammable atmospheres
do not use the headset in environments where there is a danger
of ignition of flammable gases.
WarranTy
limited one (1) -year Warranty
Gn us, inc., warrants this product to be free from defects in
materials and workmanship (subject to the terms set forth
below) for a period of one (1) year from the date of purchase
(“Warranty period”). during the Warranty period, Gn will repair
or replace (at Gn’s discretion) this product or any defective parts
(“Warrenty service”). If repair or replacement is not commercially
practicable or cannot be timely made, Gn may choose to refund
to you the purchase price paid for the affected product. repair or
replacement under the terms of this warranty does not give right
to any extension or a new beginning of the period of warranty.
Claims under the Warranty
to obtain Warranty service, please contact the Gn dealer from
further information about customer support.you will need to
return this product to the dealer or ship it to the dealer or to Gn (if
packaging affording an equal degree of protection.you will bear
the cost of shipping the product to Gn. If the product is covered
by the warranty, Gn will bear the cost of shipping product back
to you after the completion of service under this warranty. return
shipping will be charged to you for products not covered by the
warranty or requiring no warranty repair.
the Following information must be presented to obtain Warranty
service: (a) the product, and (b) proof of purchase, which clearly
indicates the name and address of the seller, the date of purchase
and the product type, which is evidence that this product is
within the Warranty period. please further include (c) your return
address. (d) daytime telephone number, and (e) reason for return.
Jabra bt4010
11
as part of Gn/Jabra’s efforts to reduce environmental waste
you understand that the product may consist of reconditioned
equipment that contains used components, some of which
have been reworked. the used components all live up to Gn/
Jabra’s high quality standards and comply with the Gn product
performance and reliability specifications. you understand that
replaced parts or components will become the property of Gn.
Limitation of Warranty
this warranty is only valid for the original purchaser and will
automatically terminate prior to expiration if this product is
sold or otherwise transferred to another party. the warranty
provided by Gn in this statement applies only to products
purchased for use, and not for resale. It does not apply to open
box purchases, which are sold“as is”and without any warranty.
specifically exempt from warranty are limited-life consumable
components subject to normal wear and tear, such as microphone
windscreens, ear cushions, modular plugs, ear tips, decorative
finishes, batteries, and other accessories. this warranty is invalid
if the factory-applied serial number, date code label, or product
label has been altered or removed from this product. this
Warranty does not cover cosmetic damage or damage due to
misuse, abuse, negligence, acts of nature, accident, disassembling
or modification of, or to any part of, the product. this Warranty
does not cover damage due to improper operation, maintenance
or installation, or attempted repair by anyone other than Gn or
a Gn dealer which is authorized to do Gn warranty work. any
unauthorized repairs will void this Warranty.
repaIrs or replacements as provIded under thIs
Warranty are the eXclusIve remedy oF the consumer. Gn
shall not be lIable For any IncIdental or conseQuentIal
damaGes For breach oF any eXpress or ImplIed Warranty
on thIs product. eXcept to the eXtent prohIbIted by
laW, thIs Warranty Is eXclusIve and In lIeu oF all other
eXpress and ImplIed WarrantIes Whatsoever, IncludInG
but not lImIted to the Warranty oF merchantabIlIty and
FItness For a practIcal purpose.
note! this warranty gives you specific legal rights. you may
have other rights which vary from location to location. some
jurisdictions do not allow the exclusion or limitation of incidental
or consequential damages or implied warranties, so the above
exclusions may not apply to you. this warranty does not affect your
legal (statutory) rights under your applicable national or local laws.
Jabra bt4010
12
cerTiFicaTion and saFeTy approvals
FCC
this device complies with part 15 of the Fcc rules. operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
users are not permitted to make changes or modify the device in
any way. changes or modifications not expressly approved by Jabra
(Gn us, Inc.) will void the user’s authority to operate the equipment.
this equipment has been tested and found to comply with the
limits for a class b digital device, pursuant to part 15 of the Fcc
rules. these limits are designed to provide reasonable protection
against harmful interference in a residential installation. this
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. however,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-
-
-
reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-
consult the dealer or an experienced radio/tv technician for help.
the device and its antenna must not be co-loaded or operating in
conjunction with any other antenna or transmitter.
Industry Canada
operation is subject to the following two conditions: (1) this
device may not cause interference and (2) this device must accept
any interference, including interference that may cause undesired
operation of the device.
the term“Ic:”before the certification/registration number only signifies
that registration was performed based on a declaration of conformity
indicating that Industry canada technical specifications were met. It
does not imply that Industry canada approved the equipment.
Jabra bt4010
13
CE
this product is ce marked according to the provisions of the
r & tte directive (99/5/ec).
hereby, Gn a/s, declares that this product is in compliance
with the essential requirements and other relevant provisions of
directive 1999/5/ec.
Bluetooth
the bluetooth® word mark and logos are owned by the bluetooth
sIG, Inc. and any use of such marks by Jabra is under license. other
trademarks and trade names are those of their respective owners.
glossary
1. Bluetooth is a radio technology that connects devices, such
as mobile phones and headsets, without wires or cords
over a short distance approx. 33 feet (10 meters). Get more
information at www.bluetooth.com
2. Bluetooth profiles are the different ways that bluetooth
devices communicate with other devices. bluetooth phones
support either the headset profile, the hands-free profile
or both. In order to support a certain profile, a phone
manufacturer must implement certain mandatory features
within the phone’s software.
3. Pairing creates a unique and encrypted link between two
bluetooth devices and lets them communicate with each other.
bluetooth devices will not work if the devices have not been
paired.
4. Passkey or PIN is a code that you enter on your mobile phone
to pair it with your Jabra bt4010. this makes your phone and
the Jabra bt4010 recognize each other and automatically work
together.
5. Standby mode is when the Jabra bt4010 is passively waiting
for a call. When you‘end’a call on your mobile phone, the
headset goes into standby mode.
dispose of the product according
to local standards and regulations.
Jabra bt4010
14
type: bt4010
Ic: 2386c-bt4010
Made in China
© 2008 Gn netcom a/s. all rights reserved. Jabra® is a registered trademark of
Gn netcom a/s. all other trademarks included herein are the property of their
respective owners. the bluetooth® word mark and logos are owned by the
bluetooth sIG, Inc. and any use of such marks by Gn netcom a/s is under license.
(design and specifications subject to change without notice).
|