LL Bean Weather Radio OKSV1 User Manual

1. RESET: Reset unit to default settings  
MAIN UNIT - SOLAR PANEL  
2. °C / °F: Select temperature  
The solar panel is an energy saving feature, which is  
an environmentally friendly way to provide additional  
power to the main unit and prolongs battery life. How-  
ever, it cannot replace battery power entirely.  
REMOTE SENSOR  
Solar First Watch Weather Station  
with Indoor / Outdoor Temperature  
Model:0KSV1  
2
SENSOR DATA TRANSMISSION  
To search for a sensor:  
1
Press and hold  
+ MODE.  
4
5
3
The sensor reception icon in the remote sensor  
area shows the status:  
USER MANUAL  
EN  
ICON  
DESCRIPTION  
INTRODUCTION  
Main unit is searching for  
sensor(s).  
1. LED status indicator  
2. Wall mount hole  
3. Battery compartment  
4. RESET hole  
Thank you for selecting this Weather Station.  
NOTE Please keep this manual handy as you use  
your new product. It contains practical step-by-step  
instructions, as well as technical specifications and  
warnings you should know about.  
A channel has been found.  
5. CHANNEL switch  
The sensor cannot be  
found.  
OVERVIEW  
GETTING STARTED  
FRONT VIEW  
TIP The transmission range may vary depending  
on many factors. You may need to experiment with  
various locations to get the best results.  
IMPORTANT Set up the remote outdoor sensor  
first before setting the main unit.  
1
REMOTE SENSOR – INSERT BATTERIES  
MANUALLY SET CLOCK  
To set the clock manually:  
1. Press and hold MODE.  
The main unit can collect data from up to 3 sensors.  
To set up the sensor:  
2. Press  
or  
to change the settings.  
1. Open the battery compartment.  
2. Insert the battery, matching the polarities.  
3. Select a channel then press RESET.  
4. Close the battery door.  
3. Press MODE to confirm.  
2
4. The settings order is: time zone,12/24 hr format,  
hour, minute, year, calendar mode (day – month /  
month – day), month, day and language.  
6
5. Place the sensor within 30 m (98 ft) of the main  
unit using the table stand or wall mount.  
7
Time zone offset sets the clock +/- 23 hours from the  
received clock signal time.  
TIP Ideal placements for the sensor would be in  
any location on the exterior of the home at a height  
of not more than 1.5 m (5 ft) and which can shield it  
from direct sunlight or wet conditions for an accurate  
reading.  
8
3
Select the time zone: (P) Pacific, (E) Eastern, (C)  
Central or (M) Mountain.  
NOTE The language options are English (E), Ger-  
man (D), French (F), Italian (I), Spanish (S) and  
Russian (R).  
9
4
5
To select display mode:  
Press MODE to choose between clock with seconds,  
clock with weekday or calendar.  
1. Solar panel  
2. Remote sensor reception indicator  
3. Indoor temperature  
TEMPERATURE  
To toggle temperature unit:  
Press °C / °F.  
4. MODE: Change settings / display  
5.  
/
: Increase / decrease value; activate /  
To toggle between each outdoor sensor’s readings:  
deactivate clock reception signal;  
between outdoor channels (1-3)  
:
toggle  
Press  
OR  
repeatedly.  
6. Outdoor temperature  
7. Time zone  
Press and hold + MEM for 2 seconds to initiate auto  
toggle of outdoor channels.  
1.5 m (5 ft)  
To end press  
.
8. Clock with weekday  
To toggle between current, minimum and maxi-  
mum records:  
Press MEM repeatedly.  
9. MEM: View current, maximum and minimum  
temperature  
BACK VIEW  
To clear the records:  
Press and hold MEM.  
NOTE  
Press RESET after each battery change or channel  
selection.  
RESET  
Use alkaline batteries for longer usage and  
consumer grade lithium batteries in temperatures  
below freezing.  
Press RESET to return to the default settings.  
PRECAUTIONS  
Do not subject the unit to excessive force, shock,  
dust, temperature or humidity.  
Do not cover the ventilation holes with any items  
such as newspapers, curtains etc.  
Do not immerse the unit in water. If you spill liquid  
over it, dry it immediately with a soft, lint-free  
cloth.  
MAIN UNIT – INSERT BATTERIES  
Do not clean the unit with abrasive or corrosive  
materials.  
Do not tamper with the unit’s internal components.  
This invalidates the warranty.  
Only use fresh batteries. Do not mix new and old  
batteries.  
Images shown in this manual may differ from the  
actual display.  
1. Remove the battery compartment.  
1
2
2. Insert the batteries, matching the polarities.  
3. Press RESET after each battery change.  
MEANING  
LOCATION  
Clock / alarm  
Outdoor temperature  
Main unit batteries  
low  
When disposing of this product, ensure it is  
Sensor battery low  
RAR802_MANUAL R3.indd  
1
1/6/12 11:40:37  
 

Krups Coffeemaker GVX2 User Manual
Lincoln Electric Welding System IM10005 User Manual
Logitech Car Speaker X 210 User Manual
LST Smoke Alarm M220E User Manual
Makita Pressure Washer EHW120 User Manual
Marshall Amplification Stereo Amplifier JVM 2 User Manual
Marvel Industries Beverage Dispenser 3SWCCE User Manual
Metra Electronics Automobile Accessories 99 7892 User Manual
Middleby Marshall Oven PS528 Double User Manual
Midland Radio Two Way Radio 1001z User Manual