Manitowoc Ice Ice Maker K00340 User Manual

K00340  
IB-0620/0820/1020  
ON A CORNELIUS ABS OR ED150 ICE DISPENSER  
Installation Instructions  
1. Set adapter on dispenser. Position the adapter so that the front flange of the adapter will be up against the front lip of  
the dispenser. Adapter may have to be moved towards the back of the dispenser.  
2. Using the slotted holes in the adapter as a template, drill four (4) 9/64” diameter holes at the bottom of the slots.  
NOTE: Do not drill deeper than 1/4” past the sheet metal. Use a drill stop!  
3. Fasten adapter to dispenser using the four (4) #8 screws supplied with the adapter kit.  
4. Set the ice machine on top of the adapter. Align holes in ice machine front angle with threaded bosses on the adapter.  
5. Secure the ice machine to the adapter with two (2) #8-32 screws supplied with the kit.  
6. Set the bin cover on the adapter, move backwards until the cover hits the stop, and lower the plastic cover insuring  
that the latch locks.  
7. To remove the bin cover, twist the knob, lift up, and pull forward.  
Place a large fillet of food grade RTV inside edge  
along both sides where adapter touches bin  
#8-32 Screw  
2 Places  
Adapter  
#8 Screw  
4 Places  
Bin Cover  
Deflector must stay in place  
Manitowoc Ice, Inc.  
2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA  
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879  
8014173  
Rev. 03/31/03  
 

LG Electronics Flat Panel Television W2253V User Manual
Liebert Power Supply 5000RT230 User Manual
Lightolier Indoor Furnishings 1004SIC User Manual
Lincoln Electric Welding System 404D 22 User Manual
Makita Planer M102 User Manual
Maxtor Computer Drive 20302300 User Manual
Melissa Hair Dryer 235 002 User Manual
Meridian Audio DVD Player DVP1500 User Manual
Metra Electronics Musical Instrument Amplifier 99 5807 User Manual
Middleby Marshall Oven PS300 Series User Manual