Calculite® HID Wall Wash C4T4W
Page 1 of 2
4 1/2" Aperture, T4.5 Ceramic Metal Halide
5
1
2
4
3
6
8
9
10
7
20" (508 mm) to
30" (762 mm)
8-7/8" (226 mm)
Vertical Adjustment:
5/8" (16 mm) to
2 7/8" (73 mm)
7-1/2"
(190 mm)
Top View
4-1/4" (108 mm) Dia.
2" (50 mm) max.
Ceiling Thickness
5-1/2" (140 mm) Dia.
Ceiling Cutout: 5 1/8” (130 mm) Dia.
Reflector Trim
Frame-In Kit
Lamp
C420T4E1
C420T4E2
C439T4E1
C439T4E2
C470T4E1
C470T4E2
Electronic 120V
Electronic 277V
Electronic 120V
Electronic 277V
Electronic 120V
Electronic 277V
20W T4.5 Ceramic MH
20W T4.5 Ceramic MH
39W T4.5 Ceramic MH
39W T4.5 Ceramic MH
70W T4.5 Ceramic MH
70W T4.5 Ceramic MH
C4T4W
CLW
Specular Clear, White Painted Flange.
Specular Clear, Matching Flange.
Comfort Clear Diffuse, White Painted Flange.
Comfort Clear Diffuse, Matching Flange.
Champagne Bronze, White Painted Flange.
Champagne Bronze, Matching Flange.
CLP
CCDW
CCDP
CCZW
CCZP
Features
Electrical
1. Upper Reflector: Clear anodized aluminum, 0.040” (16 ga.). Provides wide
beam optics ideal for general lighting and wall washing.
Electronic Ballast: 120V or 277V, 50/60 Hz., encased, high power
factor, T.H.D. <15%, thermally and transient protected, RMI/RFI complies with
FCC Part 18 non-consumer limits, shut-down circuit at end of lamp life, sound
rating “A”, -5°F minimum starting temperature, Type 1 Outdoor rating.
2. Downlight/Wall Washer Reflector: Provides vertical surface wall wash-
ing and downlighting. Low brightness with 50° visual cut-off to lamp and
lamp image. Self-flanged reflector with white or matching (polished) flange.
Consult factory for other finishes.
Ballast
ANSI Code Voltage Max. Amps Input Watts
20W MH M156
39W MH M130
70W MH M139
120/277
120/277
120/277
0.21/0.10
0.39/0.17
0.67/0.29
23
44
78
3. Lamp Shield: High temperature glass as required by code, captive during
re-lamping. Light diffusion provides extremely smooth beam.
4. Socket Housing: Galvanized steel, pre-wired with G8.5 pulse rated socket.
Snaps onto reflector/housing for secure attachment without tools. Unitized
construction assures proper optical alignment of lamp to reflector.
5. Mounting Frame: 0.048” (18 ga.) galvanized steel. Vertical adjustment
mechanism accommodates mounting to virtually any ceiling system using
mounting bars (provided), or 1/2" EMT tubing (by others). Single locking
feature secures all adjustments. Alignment holes and markings allow
fixture to be preset prior to installation.
Options and Accessories
Chicago Plenum: Consult Factory.
Labels
UL (Suitable for Damp Locations), CSA, I.B.E.W.
For 70W, install fixtures with minimum spacing between:
1. Center-to center of adjacent luminaries: 2 feet.
2. Top of luminaire to overhead building member: 1/2 inch.
3. Luminaire center to side building member: 1 foot.
6. Mounting Ring: 0.048” (18 ga.) galvanized steel. Designed for vertical
adjustment from above or below for ceilings from 0” to 2” thick. Center-line
notches allow consistent alignment of multiple fixtures.
7. Mounting Bars: 0.048” (18 ga.) galvanized steel. Pre-installed, telescoping
bars extend to 30” long and lock securely into position. Built-in locking tabs
provide positive attachment to common T-bar systems. Self-centering feature
simplifies installation in 24” O.C. grid systems. Attaches to steel or wood
joists without accessories.
Job Information
Type:
Job Name:
Cat. No.:
8. Trim Retention Springs: Rust resistant springs secure reflector/housing
for quick, tool-less installation.
9. Ballast / Socket Housing / Cover Assembly: Electronic, snaps onto
junction box without tools for inspection and ballast replacement, accessible
from below.
Lamp(s):
Notes:
10. Junction Box: 0.048” (18 ga.) galvanized steel. UL listed for 8 No. 12 AWG,
90°C through branch circuit conductors. Allows inspection from below.
11. Thermal Protector: (Not Shown) Meets NEC and UL requirements. Do not
install insulation above nor within 3" (76mm) of any part of the luminaire.
Lightolier a Genlyte Thomas Company
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
© 2004 Genlyte Thomas Group LLC (Lightolier Division) • A0504
|