Lenoxx Electronics CD Player CD85 User Manual

COMPACT DISC PLAYER  
WITH ESP PLUSTM ANTI-SKIP PROTECTION  
MODEL CD-85  
OPERATING INSTRUCTIONS  
PLAYS MUSIC COMPACT DISCS  
BASS BOOST SYSTEM  
6 DIGIT LCD VISUAL DISPLAY  
TRACK REPEAT & DISC REPEAT  
60 SECOND ESP (ELECTRONIC SHOCK PROTECTION) PLUSTM SYSTEM  
DELUXE STEREO HEADPHONES INCLUDED  
USES 2 SIZE “AA” BATTERIES (NOT INCLUDED)  
LINE OUT JACK - CONNECTS TO YOUR STEREO SYSTEM  
PLEASE READ CAREFULLY BEFORE USE  
IB-CD85(21A-60C9)-WM-E-010603  
 
POWER SOURCES  
Power your CD player by connecting an optional AC ADAPTOR or by inserting 2 size  
“AA” fresh alkaline batteries.  
NOTE: Before you buy an optional AC Adaptor, please note the only AC ADAPTOR  
suitable for this player is DC 4.5V 600mA, with polarity  
, others may  
damage your player. Please check voltage and current (mA) before buying an  
AC ADAPTOR.  
Using with Batteries  
Insert 2 size “AA” alkaline batteries  
according to the + and - markings in  
the BATTERY COMPARTMENT.  
TIPS ON BATTERY USE  
Reversing polarities will damage the batteries and possibly your set. Be sure to  
follow polarity ( + and - ) as indicated.  
Do not mix different types together (Alkaline, Carbon-Zinc, Nickel-Cadmium etc.),  
or old batteries with new ones.  
When not in use for an extended period of time, or while internal batteries will not  
be used, remove them to prevent possible acid leakage or corrosion resulting in  
damage to your player.  
When the batteries have become discharged, they must be disposed of in a safe  
manner that complies with all applicable laws.  
Installation of batteries should only be done by an adult (for safety).  
ALKALINE BATTERY LIFE  
Bear in mind that battery life expectancy is based upon volume and bass listening  
levels.  
Maximum battery power consumption happens at maximum settings. Typical life for 2  
size “AA” alkaline batteries is above 7.5 hours of continuous use for CD play.  
WHEN  
SHOWS IN THE DISPLAY  
While CD playing, if the alkaline batteries are weak and discharged, this symbol “  
shows or flashes in the display, then the power automatically turns off. If this occurs,  
replace the alkaline batteries (also if the display does not show anything, the batteries  
are dead).  
NOTE: You may use rechargeable batteries on this set. However, because  
rechargeable batteries generally have lower voltage (1.2 volts instead of  
1.5 volts). Your playing time will be much less than normal fresh alkaline  
batteries.  
2
IB-CD85(21A-60C9)-WM-E-010603  
 
CONNECTING TO HOME STEREO SYSTEMS  
The LINE OUT jack is made to accept a stereo mini plug (3.5mm). Simply connect the  
cable’s mini plug to the LINE OUT jack on your player, and the other appropriate end  
usually RCA JACKS to the CD/AUX INPUTS of your home stereo.  
YOUR STEREO  
YOUR CD PLAYER  
SYSTEM  
TO LINE OUT JACK  
OPTIONAL CABLE (3.5mm)  
TO RCA JACKS  
TO AUX IN JACKS  
3
IB-CD85(21A-60C9)-WM-E-010603  
 
CD PLAYING  
1 Load the Disc.  
Push  
here  
Disc  
Slide right to open  
Label side up  
2 Connect the Headphones.  
Stereo Headphones  
To PHONES jack  
3 Press the PLAY/PAUSE button.  
PLAY/PAUSE  
button  
TOTAL PLAYING  
TIME OF THE CD  
TOTAL TRACKS  
TRACK NUMBER  
CURRENTLY  
PLAYING  
ELAPSED PLAYING  
TIME OF THE  
CURRENT TRACK  
VOLUME CONTROL  
NOTE: The ESP PLUSTM function will turn on automatically when the PLAY/PAUSE  
button is pressed.  
4 Adjust the Volume.  
4
IB-CD85(21A-60C9)-WM-E-010603  
 
OTHER OPERATIONS  
Operation  
Press  
Display window shows  
PLAY/PAUSE  
button  
To pause play  
PLAYING TIME  
FLASHES  
TRACK NUMBER  
CURRENTLY PLAYING  
PLAY/PAUSE  
button  
To release pause and resume play  
TRACK NUMBER PLAYING TIME  
CURRENTLY PLAYING ADVANCES  
To stop  
STOP button  
TOTAL TRACKS TOTAL PLAYING TIME  
STOP button once and wait 30 seconds, or press STOP  
button twice.  
To turn off the power  
SKIP(SEARCH) FORWARD button  
repeatedly).  
once (or  
once (or  
To skip to the next track(s)  
SKIP(SEARCH) BACKWARD button  
repeatedly).  
To skip to the previous track(s)  
Keep SKIP(SEARCH) FORWARD button  
depressed and release when the desired music  
section of the disc is found.  
To go ahead at high speed  
(search)  
Keep SKIP(SEARCH) BACKWARD button  
depressed and release when the desired music  
section of the disc is found.  
To go back at high speed (search).  
BASS BOOST switch  
This switch enhances the low frequency (bass)  
sounds at low listening levels. Switch the BASS  
BOOST switch ON or OFF to suit your taste.  
BASS BOOST switch  
5
IB-CD85(21A-60C9)-WM-E-010603  
 
REPEAT, INTRO AND RANDOM PLAY  
You may have repeat, intro or random play using the REPEAT/RANDOM button. Press  
the REPEAT/RANDOM button several times, and the display will show the followings in  
turn:  
REPEAT 1 --> REPEAT ALL --> INTRO --> SHUFF --> NORMAL PLAY  
Single Track Repeat  
Plays one song over and over till you press STOP.  
X 1  
During play, select the song you want to repeat with  
REPEAT  
RANDOM  
either of the SKIP/SEARCH buttons (  
or  
), then  
press the REPEAT/RANDOM button once, the symbol  
REPEAT 1  
REPEAT 1 will appear in the display.  
The song currently playing will repeat over and over,  
until you press STOP.  
All Tracks Repeat  
Repeats all songs in order, till you press STOP.  
X 2  
REPEAT  
During play, press the REPEAT/RANDOM button twice,  
RANDOM  
the symbol REPEAT ALL will show in the display.  
All songs will keep playing in sequence 1, 2, 3, etc., and  
when finished, will start all over again until you press the  
STOP.  
REPEAT ALL  
Intro Play  
This plays the first 10 seconds of songs in sequential  
order.  
X 3  
1. During play, press the REPEAT/RANDOM button  
three times, the word INTRO will flash in the display.  
2. Press the PLAY button, the word INTRO will stop  
flashing and the first 10 seconds of each song on the  
CD will play in sequential order.  
REPEAT  
RANDOM  
3. When you find a song you like, press the PLAY button  
again, the symbol INTRO will disappear from the  
display, normal play will be resumed, that song (and  
the following songs) will play NORMALLY.  
Random Play  
This plays the songs on the disc in a random order.  
1. During play, press REPEAT/RANDOM button four times  
the word SHUFF will flash.  
X 4  
REPEAT  
RANDOM  
2. Press the PLAY button, this will play all of the songs  
in random order selected by the CD player. The word  
SHUFF will stop flashing.  
3. Press the SKIP/SEARCH button  
next random song.  
to skip to the  
6
IB-CD85(21A-60C9)-WM-E-010603  
 
PROGRAMMED PLAY  
The tracks (songs) on the disc can be programmed (arranged in advance) to play in  
any order you prefer (up to 20 tracks can be programmed).  
Programming Example:  
1
3
Program Number  
etc.  
etc.  
2
5
3
8
4
1
5
2
6
4
7
1
8
1
Track Number (song number)  
During programming, the word PROG flashes in the display. To program songs to play  
in your preferred order, follow steps below:  
1.Press the PROGRAM button.  
3.Press the PROGRAM button to confirm.  
Track 3 is now programmed.  
Program number 2 will now show in the  
display, ready for your next selection of  
track.  
PROGRAM  
The word PROG and “  
” will flash in  
the display.  
4.Repeat steps 2 and 3 to program other  
tracks till you finish (up to 20  
selections).  
5.After programming is finished, press  
the PLAY button to begin programmed  
play. The word PROG changes to be  
steady on in the display, and music  
begins to play in the order you  
programmed.  
Program number  
2.Press the SKIP/SEARCH button (  
or  
) to select track number 3 (example).  
PROG and track number “03” will flash in  
the display.  
SKIP/SEARCH  
NOTE:  
- The player will stop automatically after  
all programmed tracks have been  
played.  
- To quit programmed play, press the  
STOP button once. Then you may press  
the PLAY button to re-start normal play.  
PROG  
Your programmed number will be  
lost:  
When the alkaline batteries are  
exhausted or removed, or the optional  
AC ADAPTOR is disconnected.  
Track number  
When the power is shut off.  
7
IB-CD85(21A-60C9)-WM-E-010603  
 
60 SECOND ESP PLUSTM ANTI-SKIP SYSTEM  
This set is designed with the latest 60 second ESP PLUSTM (Electronic Shock Protection)  
- which allows virtually unlimited gentle skip protection above the normal 60 second  
shock protection.  
The 60 second ESP PLUSTM function prevents the sound from skipping by using a  
buffer memory that stores music data. The new 60 second ESP PLUSTM system can  
store more music than normal 60 second anti-skip systems.  
This new design allows gentle swaying of the set (as in walking) without music skipping.  
This function (CD ESP PLUSTM) may not work during heavy jogging.  
The 60 second ESP PLUSTM function will turn on automatically when the PLAY/PAUSE  
button is pressed.  
When the PLAY/PAUSE button is pressed, the “  
” (memory  
basket) indicator will appear in the display, the digital data (music)  
is stored in the “read-ahead” memory buffer before it is decoded  
and played.  
EMPTY MEMORY  
FULL MEMORY  
The “  
” mark changes to the “  
” mark, indicating that the  
memory buffer (basket) is full.  
When the set is subject to a shock or a bump during play, the  
data stored in memory continues to be decoded and played.  
This gives the pickup time to stabilize and continue reading  
new music. As the data is used from memory, the indicator  
SOME MEMORY USED  
changes from “  
original position, new data is stored in memory and the display  
changes back to the “ ” mark.  
” to “  
”. Once the pickup returns to its  
If the set is subject to repeated shocks and all the data stored  
in memory is used up, the “ ” mark is displayed and the  
sound will skip or stop for a brief period until the memory basket  
has time to fill up again.  
ALL MEMORY USED UP  
NOTE:  
- The music may stop if the player receives continuous shocking.  
- You may hear noise or skipping if the CD is dirty or scratched.  
- If you press PLAY/PAUSE, or SKIP (SEARCH) buttons, the  
memory basket will empty itself temporarily.  
8
IB-CD85(21A-60C9)-WM-E-010603  
 
MAINTENANCE  
Handling Compact Discs  
Cleaning the lens  
Dirty, scratched or warped discs may  
A dirty lens will cause sound skipping. If  
the lens is very dirty, the player may not  
work. We suggest using a special cleaning  
disk (not included) available in most music  
and Hi-Fi stores. However, if you do not  
have one, you may use a cotton swab  
very slightly dampened with alcohol to  
clean the lens.  
cause skipping or noise.  
Handle the disc only by the edges. To  
keep clean, do not touch its surface.  
Discs should be stored in their cases  
after use to avoid scratches.  
Do not expose discs to direct sunlight,  
high humidity, high temperatures, or  
dust, etc. Prolonged exposure to  
extreme temperatures can warp the disc  
(such as leaving the discs in your car  
during summertime).  
Cleaning the cabinet  
Wipe with a soft cloth. If the cabinet is  
very dirty, dampen (not dripping wet) the  
cloth with a weak solution of soapy water,  
and then wipe clean.  
Do not stick or write anything on either  
side of disc. Sharp writing instruments, or  
the inks used in some felt-tip pens, may  
damage its surface.  
Cleaning the Discs  
To remove the Disc  
Fingerprints should be carefully wiped  
Open the CD DOOR by sliding the DOOR  
OPEN button, hold the disc by the edge  
while slightly pressing on the center  
spindle as illustrated, then lift it from the  
edge to release and remove.  
from the surface of disc with a soft cloth.  
Unlike conventional records, compact  
discs have no grooves to collect dust  
and microscopic dirt, so gently wiping  
them with a soft cloth should remove  
most particles. Wipe in a straight  
motion from the center to the edge.  
NOTE:  
Never use thinner, benzine, record  
Always press STOP button and wait for  
the disc to stop rotating before sliding the  
DOOR OPEN button to remove the disc.  
cleaner or antistatic spray on a compact  
disc. Such chemicals can damage its  
plastic surface.  
9
IB-CD85(21A-60C9)-WM-E-010603  
 
SAFETY PRECAUTIONS  
Do not take the set apart. The laser beam used in the set may harm your eyes. Refer  
servicing to qualified service personnel only.  
Do not insert pins or coins, clips, or any objects inside the set.  
This set is equipped with a safety device which automatically turns the laser beam off  
when the CD DOOR is opened.  
Do not drop the set or subject it to strong shocks. Doing so could result in damage.  
Do not place the set in locations where the temperature is high, or in humid or dusty  
locations, or locations with long heavy vibrations, or tilted surfaces.  
The set’s cabinet may warp or the set may be damaged if it is placed in direct sunlight,  
near heaters (where the temperature is 1400F/600C or higher) or in cars with the  
windows closed. In the summer, the temperature may get as high as 2120F/1000C or  
more.  
Use the set within a temperature range of 410F/50C to 950F/350C.  
Use ONLY the optional DC 4.5V AC ADAPTOR with polarity  
, others may  
damage your set. Disconnect the ADAPTOR from the wall outlet when the set is not to  
be used for an extended period of time (3 days or more).  
When cleaning your set, use a soft dry cloth. Do not use solvents or commercially  
available cleaners, as they may damage or discolor the finish.  
Do not wear headphones while operating a motor vehicle. This could create a traffic  
hazard and is illegal in many areas. Do not use this set when bicycling or running.  
The headphones supplied with your set provide superb stereo listening while allowing  
you to hear some outside sounds when listening at normally low volume levels. Listening  
at extremely high volume levels minimizes the intrusion of outside noise/sounds. In the  
interest of safety, it is strongly advised against the use while engaging in activities  
where the exclusion of external sounds (whistles, horns, sirens, traffic, etc.) could be  
hazardous. Also loud volume can hurt your ears. If you notice that the sound has  
become weak or distorted or if tracks do not change, this is an indication that your  
batteries are weak. Replace both batteries at the same time (see Using with Batteries).  
Your CD-85 is identified by a serial number located in the BATTERY COMPARTMENT.  
Record this number in the space provided below.  
Model CD-85  
Serial No.  
Date Purchased:  
This manual contains detailed information on its safety and use. Please read it carefully  
so that you may take full advantage of its many features, and ensure a safe reliable  
operation. Keep this manual for future reference.  
CONDENSATION  
If cold water is poured into a glass, water droplets form on the outside of the glass. This is  
called condensation. Condensation may occur on internal operating parts of the lens.  
Condensation occurs:  
When the set is brought from the cold outdoors into a warm room, or if it is in a cold  
room to a room which is heated, or in the summer, if the set is moved from an air-  
conditioned room or car to a hot or humid location.  
Should condensation occur, the set may not operate properly. Open the CD DOOR  
and wait for about 20 minutes (to allow the internal parts to adjust to the surrounding  
temperature) before using the set.  
10  
IB-CD85(21A-60C9)-WM-E-010603  
 
IMPORTANT REQUIREMENT BY THE FCC  
Since the CD circuitry may cause interference to other radios nearby, switch this  
set off when not in use or move it away from the affected radios.  
This device complies with Part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including interference that  
may cause undesirable operation.  
NOTE: This equipment has been tested and found to comply with the limits for a  
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection against harmful interference  
in a residential installation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in accordance with  
the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off  
and on, the user is encouraged to try to correct the interference by one or  
more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to  
which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
SAFETY CERTIFICATION  
This Compact Disc Player is made and tested to meet safety standards of the FCC  
requirements and comply with safety performance of the U.S. Department of Health  
and Human Services, and also with FDA Radiation Performance Standards 21 CFR  
Subchapter J.  
WARNING  
To prevent fire or shock hazard, do not expose this appliance to rain or moisture.  
California Proposition 65 Warning:  
This product contains chemicals known to the state of California to cause cancer,  
and birth defects or other reproductive harm.  
Wash Hands After Handling.  
LASER SAFETY  
THIS SET EMPLOYS AN OPTICAL LASER BEAM SYSTEM IN THE CD MECHANISM,  
DESIGNED WITH BUILT-IN SAFEGUARDS. DO NOT ATTEMPT TO DISASSEMBLE.  
EXPOSURE TO THIS INVISIBLE LASER LIGHT BEAM MAY BE HARMFUL TO HUMAN  
EYES. THIS IS A CLASS-1 LASER PRODUCT. USE OF ADJUSTMENTS OTHER  
THAN THOSE SPECIFIED HEREIN, MAY RESULT IN HAZARDOUS LASER LIGHT  
BEAM EXPOSURE. THIS COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED  
OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE PERSONNEL. THE  
LASER MECHANISM IN THE SET CORRESPONDS TO THE STYLUS (NEEDLE) OF  
A RECORD PLAYER. ALTHOUGH THIS PRODUCT USES A LASER PICK-UP LENS,  
IT IS COMPLETELY SAFE WHEN OPERATED ACCORDING TO DIRECTIONS.  
11  
IB-CD85(21A-60C9)-WM-E-010603  
 
TROUBLE SHOOTING GUIDE  
Symptoms  
Causes  
Solutions  
Replace both batteries with fresh  
alkaline batteries. Battery life with  
fresh batteries is above 7.5 hours for  
continuous CD play (rechargeable  
batteries have 1/2 of that life).  
Batteries are weak (they  
may test OK on tester but  
they are weak for CD  
operation).  
Tracks do not  
change or set  
does not play  
normally.  
Replace both batteries with fresh  
ones.  
Dead or weak batteries.  
CD Player will not  
turn on.  
Check AC ADAPTOR connection at AC  
outlet and the right side of the set.  
The optional AC ADAPTOR  
not connected properly.  
Re-insert disc with label side facing  
up.  
Disc inserted incorrectly.  
Defective compact disc.  
CD DOOR not closed.  
Try another compact disc.  
Close the door securely.  
Disc will not play.  
Take out the CD and leave the CD  
Door open for about 20 minutes to  
dry the moisture condensation.  
Moisture has formed inside  
the CD deck.  
Headphone plug not  
inserted properly.  
Re-insert headphone plug into  
PHONES jack (not LINE OUT).  
VOLUME control set to  
minimum.  
Increase the volume.  
No sound from  
headphones.  
Replace with fresh batteries or use  
an optional AC ADAPTOR.  
Weak batteries.  
Defective compact disc.  
Try another compact disc.  
VOLUME control Headphones plugged into Plug headphones into PHONES  
has no function.  
LINE OUT jack.  
jack. (NOT THE LINE OUT JACK)  
Clean or replace the compact disc  
or clean the lens.  
The compact disc or lens  
is dirty or CD is scratched.  
Sound is skipping  
or sound stops.  
Strong vibrations.  
Music is too loud.  
BASS BOOST is ON.  
Place the player on a stable level.  
Lower the VOLUME control.  
Slide BASS BOOST switch to OFF.  
Sound is distorted.  
Replace both batteries or use an  
optional AC ADAPTOR.  
Weak batteries.  
Remove batteries and ADAPTOR.  
Wait 15 seconds and re-insert. Make  
sure batteries are fresh or the optional  
ADAPTOR has power.  
Electronic or static error  
caused circuitry to lock.  
Buttons do not  
work.  
12  
IB-CD85(21A-60C9)-WM-E-010603  
 
TECHNICAL SPECIFICATIONS  
CD Player Section  
Frequency response ..............................  
50Hz-15kHz +1/-2dB  
Sampling frequency ................................  
D/A converter .........................................  
Error correction method ..........................  
Pickup ...................................................  
44.1kHz  
1-bit  
CIRC  
Optical 3-beam semiconductor laser  
(780 nm wavelength)  
Laser diode material GaAIAs  
Laser output less than 44.6µW  
NOTE: This CD player will only play NORMAL music CDs (or CD-R CDs).  
This set will not play CD-RW encoded discs.  
General  
Maximum output (stereo headphones) .....  
Power Supply  
20mW + 20mW  
AC adaptor ...........................................  
DC .......................................................  
120V/60Hz DC 4.5V Output (not included)  
3V: Using 2 size “AA” batteries (not included)  
Set Dimensions (approximate)  
1
7
Width ...............................................  
Depth ..............................................  
Height ..............................................  
5
5
/
/
16  
16  
1  
Weight (approximate) ........................... 9.5oz. (270g) (set only)  
Because the products are subject to continuous improvement, LENOXX reserves the  
right to modify product designs and specifications without notice and without incurring  
any obligation.  
13  
IB-CD85(21A-60C9)-WM-E-010603  
 
LIMITED WARRANTY  
We warrant this product to be free from defects in material and workmanship under  
normal use for a period of 90 days after purchase and we will repair it free of charge or  
replace it at no charge, should it become defective under this warranty, providing you  
submit proof of purchase (sales slip) with the set.  
During the initial 90 day period after original purchase, we will service or exchange,  
at no charge, the set that is returned to LENOXX ELECTRONICS CORP. After the initial  
90 day period expires, and for a period of 12 months from original purchase, we will  
repair the unit covering any part(s) that need to be replaced at no charge, but will  
charge for the cost of labor, return postage paid by Lenoxx.  
This warranty does not apply to any products which have been subject to misuse,  
neglect or accident. This warranty does not cover broken headphones or cabinet.  
UNDER NO CIRCUMSTANCES WILL LENOXX ELECTRONICS CORP. BE LIABLE  
FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. Some states do not allow  
the exclusion or limitation of incidental or consequential damages, so the above limitations  
or exclusions may not apply to you.  
This warranty gives you specific legal rights, and you may also have other rights  
which vary from state to state. The following charges apply to repairs beyond the  
warranty period: $15.00. Be sure to pack carefully and return postage paid insured  
together with your money order (personal checks will not be accepted) and sales  
receipt to:  
LENOXX ELECTRONICS CORP., 2 GERMAK DRIVE, CARTERET N.J. 07008  
For customer service Dial: 1-800-315-5885  
(MONDAY - THURSDAY 9:00 AM - 5:00 PM, FRIDAY 9:00 AM - 1:00 PM EST)  
© 2003 LENOXX ELECTRONICS CORP.  
2 GERMAK DRIVE  
CARTERET, N.J. 07008  
MADE & PRINTED IN CHINA  
14  
IB-CD85(21A-60C9)-WM-E-010603  
 

Krups Coffeemaker 866 User Manual
Kyocera Fax Machine FS 3140MFP User Manual
LG Electronics Refrigerator MFL38422645 User Manual
LifeSource Blood Pressure Monitor UA 851 V VL User Manual
Linear Satellite Radio wt00z 1 User Manual
Linear Swimming Pool Gate Alarm GRD User Manual
Logitech Universal Remote 885 User Manual
Logitek Standard Elec Cable Manufacturing Indoor Fireplace C A210 User Manual
M Audio Computer Drive X SESSION User Manual
Metra Electronics Network Card OESWC 6502 STK User Manual