SP700
USER MANUAL
Thank you
Thank you for purchasing the Jabra SP700 bluetooth® Speaker-
phone. We hope you enjoy it! This instruction manual will get you
started and ready to make the most of your Speakerphone.
abouT your Jabra sP700
1
2
3
4
5
6
7
8
9
Microphone
Answer/End button
FM button
Volume up/volume down button
Charging port
Speaker
Battery status icon
Call status icon
Bluetooth status icon
10 FM transmitter status icon
2
7
1
3
9
8
6
10
+
4
-
5
Jabra SP700
2
WhaT your sPeakerPhone Does
Your Jabra SP700 lets you do all this:
-
-
-
-
-
-
-
-
-
-
answer calls
end calls
reject calls*
voice dialing*
last number redial*
mute
Transfer calls
night driving mode
adjust volume
Transmit calls or mobile music to your car stereo via fm trans-
mitter
Specifications
-
Talk time up to 14 hours (using fm transmitter) / Standby time
up to 255 hours
-
-
-
-
-
-
-
-
fm transmitter
voice announcements in 10 languages
noise reduction & echo cancellation via DSP
Weight 85 grams
operating range up to 10 meters (approximately 33 feet)
Supported bluetooth profiles: hfP, hSP, a2DP
bluetooth specification (see glossary) version 2.0.
internal rechargeable battery charged by provided car charger
or uSb cable.
* Phone dependent
Jabra SP700
3
geTTing sTarTeD
The Jabra SP700 is easy to operate. you should follow three steps
before using your speakerphone
1. Charge your speakerphone
2. Turn your speakerphone on
3. Pair your speakerphone to your mobile phone
Instruction
Tap
Duration of press
Press briefly
Press
approximately 1 sec
approximately 5 sec
Press and hold
Charge your sPeakerPhone
make sure that your speakerphone is fully charged for two hours
before you start using it. use the uSb cable to connect SP700 to
the car charger. Plug the car charger into your car’s power outlet.
The battery Status icon will light up red while charging. When
fully charged the battery Status icon will turn green. SP700 can be
charged outside your car by only using the uSb cable.
use only the chargers provided in the box - do not use chargers
from any other devices as this may damage your speakerphone.
Jabra SP700
4
Turning your sPeakerPhone on anD off
Normal mode
-
Press answer/end button for 2 seconds to turn your speaker
phone on
-
Press answer/end button for 4 seconds to turn your speaker-
phone off
Locking mode
To prevent accidental key presses that could turn your speaker-
phone on e.g. while carrying it in a bag, the speakerphone can be
turned into locking mode. Press simultaneously the answer/end
button and fm button for 4 seconds while the speakerphone is
turned on. The speakerphone is now turned off and can only be
turned on again by pressing answer/end button and fm button
simultaneously for 2 seconds.
Automatic power off
When disconnected from the mobile phone, the speakerphone
turns off automatically after 10 minutes.
Jabra SP700
5
Pairing WiTh your Phone
Speakerphones are connected to phones using a procedure called
‘pairing’. by following a few simple steps, a phone can be paired
with a speakerphone in a matter of minutes.
1. Put the Speakerphone in pairing mode
-
When you turn on your Jabra SP700 for the first time, the
speakerphone will automatically start up on pairing mode – i.e.
it is discoverable by your phone. When the speakerphone is in
pairing mode you will hear the voice announcement “Pairing
mode”and the bluetooth Status icon will flash constantly.
2. Set your Bluetooth phone to ‘discover’ the Jabra SP700
-
follow your phone’s instruction guide. first make sure that
bluetooth is activated on your mobile phone. Then set your
phone to discover the speakerphone. This usually involves go-
ing to a‘setup,’‘connect’or‘bluetooth’menu on your phone and
selecting the option to‘discover’or‘add’a bluetooth device.*
3. Your phone will find the Jabra SP700
-
your phone will find the speakerphone under name“Jabra
SP700”. your phone then asks if you want to pair with the
speakerphone. accept by pressing‘yes’or‘ok’on the phone
and confirm with the passkey or Pin = 0000 (4 zeros). your
phone will confirm when pairing is complete.
in case of unsuccessful pairing, put the Jabra SP700 into pairing
mode manually:
-
-
make sure the speakerphone is off.
Press and hold the answer/end button until you hear the voice
announcement “Pairing mode”and the bluetooth Status icon
will flash constantly.
Jabra SP700
6
ConneCTing WiTh your Phone
Speakerphone only work when it is connected to the mobile
phone. When connected the message“Connected”will be anno-
unced and the bluetooth Status icon will turn solid blue. after
pairing, the speakerphone connects automatically to your mobile
phone. if the devices are paired but not connected press the
answer/end button.
if the devices are disconnected, the speakerphone will remain in
auto reconnection mode for 10 minutes.
PlaCe The sPeakerPhone in your vehiCle
The Jabra SP700 sits discreetly and conveniently on the sun visor
using the attached clip.
Jabra SP700
7
hoW To
Answer a call
-
Tap answer/end button
End a call
-
Tap answer/end button
Reject a call *
-
Press answer/end button. a busy tone will be sent to the caller.
Make a call
-
When you make a call from your mobile phone, the call will
automatically transfer to your speakerphone. if your phone
does not allow this feature, press on the answer/end button to
transfer the call to the speakerphone
Activate voice dialing*
-
Press the answer/end button. for best results, record the voice
dialing tag through your speakerphone. Please consult your
phone’s user manual for more information about using this
feature.
Redial last number *
Double tap the answer/end button
Adjust sound and volume
-
-
Tap the volume up or volume down to adjust the volume level
(in fm mode you are not able to adjust volume via SP700 – use
your car stereo)
Mute/Un-mute
-
To mute an ongoing call press volume down button. The mute
beep tone will be heard every 5 seconds
-
To un-mute press volume up or down button.
Transfer call
-
To transfer a call from the speakerphone to the mobile phone
press answer/end button until you hear a beep.
-
To transfer a call from the mobile phone to the speakerphone
press answer/end button until you hear a beep.
Night driving mode
-
Press fm and volume up button simultaneously when the
speakerphone is on. The light will then turn off. you can turn
* Phone dependent
Jabra SP700
8
the lights back on with another press. The speakerphone will
always turn on with the lights turned on.
* functions marked with * are dependent on your phone support-
ing these features. Check your phone’s user manual for further
information.
WhaT The lighTs mean
Speakerphone Status
LED Indicator
Pairing mode
bluetooth Status icon flashes
quickly
Connected
bluetooth Status icon on
Standby/ idle
bluetooth Status icon flashes
every 2 seconds
incoming call
Call Status icon flashes every
1 second.
active call
Call Status icon on
fm mode
fm Status icon on
frequency scanning
fm Status icon flashes every
1 second
language selection
Call Status icon and bluetooth
Status icon flashes
low battery
battery Status icon on (red)
Jabra SP700
9
aDDiTional feaTures
Change voice announcement language
voice announcements give you a more convenient and safe use of
SP700. There are 10 supported languages in the following order:
1
2
uk english
uS english
french
3
4
italian
5
german
6
Spanish
7
mexican Spanish
brazilian Portuguese
mandarin Chinese
russian
8
9
10
voice announcements off (beep tone)
Default language is uk english. To change language follow these
steps:
-
enter pairing mode by press and hold answer/end button
when SP700 is off until voice announces: “Pairing mode”
-
-
Press fm button until current language is announced.
Tap volume up or volume Down button to select a new lan-
guage.
-
Select preferred language and press fm button until the new
language is announced.
note: it is possible to turn off the voice announcement function.
When tapping the volume up or volume Down buttons to
select the desired language, the beep tone indicates the voice
announcement function is off. When beep tone is heard press fm
button and the voice announcement function will be off.
Jabra SP700
10
Play music
make sure that speakerphone and mobile phone are connected.
When you play music from your mobile phone it will automatically
transfer to your speakerphone. if your phone does not allow this
feature, press the answer/end button to transfer the music to the
speakerphone. music will automatically be paused when you have
an incoming call. When call is ended it will start playing again.
Using FM transmitter
The fm transmitter in the speakerphone allows you to transmit
calls and music from your mobile to the car stereo when speaker-
phone and car radio are set to the same frequency.
-
-
Connect your mobile phone and speakerphone.
Press fm button to enter fm mode. The fm Status icon will turn
solid red and a fm frequency will be announced.
-
-
manually tune your radio to the same fm frequency and you
are now ready to transmit calls or music from your phone to
your car stereo.
fm transmitter will automatically turn off after 10 minutes if
function is not used.
Changing FM frequency
When you enter fm mode the speakerphone will always transmit
calls and music on the latest used fm frequency. for the fm trans-
mitter to work well, a free radio frequency must be found. a free
radio frequency is one that no commercial and public radio sta-
tion is broadcasting on. as you drive and change environment the
fm audio quality could potentially be reduced due to frequency
interferences. if sound performance is unsatisfactory it is possible
to select a new fm frequency.
-
-
-
enter fm mode.
Press volume up button until“Searching”is announced.
When a new frequency is found and announced, tune your
radio manually into the same fm frequency. The speakerphone
will automatically save the new frequency.
a tap on the volume up/volume down button will change the
frequency on your speakerphone by 0.1 mhz allowing you to fine
tune the signal.
Jabra SP700
11
Using FM transmitter when voice announcement function
is off
if voice announcement function is turned off you can select any of
the pre-programmed frequency channels in the following order:
leD indication
(fm frequency selection mode)
Pre-
programmed
frequency
Channel
no
battery
Call
bluetooth
fm
status
status
status
status
1
2
3
4
5
6
7
88.1 mhz
88.3 mhz
88.5 mhz
88.7 mhz
88.9 mhz
89.1 mhz
89.3 mhz
off
off
on
off
on
on
on
off
on
off
on
off
on
on
on
off
off
on
on
off
on
flash
To select the desired fm frequency channel, follow these steps:
-
-
Connect your mobile phone and speakerphone.
Press fm button to enter fm mode. The default frequency
channel is 88.1mhz
-
-
Press the volume up or volume Down button to move to the
next/previous channel.
manually turn your radio into the same fm frequency and you
are now ready to transmit calls or music from your phone to
your car stereo.
note1: While changing frequencies, fm Status indicator flashes
every 1 second.
note2: While changing frequencies, a repeated beep-tone will be
heard and frequencies can be recognized by the combinations of
Status indicators. (See the table above.)
Caller ID
When you have an incoming call the speakerphone will announce
the number of the caller. if your radio supports rDS Text the
phone number will furthermore be showed on the radio display.
Jabra SP700
12
Software upgrade
it is possible to upgrade the speakerphone software following
these steps:
-
-
Download the latest version of jabra700update.exe from
Click the exe file to start up the program and follow the
instruction.
-
-
Turn off the speakerphone.
Connect the speakerphone to the computer using the uSb
cable.
-
-
Press simultaneously fm button and volume up button.
When entering Software upgrade mode, the designated ring
tone can be heard.
-
-
-
make sure the“Jabra SP700”appears listed in the Windows
device manager.
When you are prompted to install the driver, install the Jabra
provided driver.
after the“Jabra SP700”appears in the Windows device
manager, the car kit software can be upgraded.
TroubleshooTing & faQ
I hear crackling noises
-
bluetooth is a radio technology, which means it is sensitive to
objects between the speakerphone and the connected device.
it is designed for the speakerpone and the connected device to
be used within 33 feet (10 meters) of each other, with no major
objects in the way (walls, etc.).
I cannot hear anything on my speakerphone
-
-
increase the volume on the speakerphone
ensure that the speakerphone is paired to a device that is
playing
-
make sure your phone is connected to the speakerphone by
tapping the answer/end button.
I am having pairing problems
-
you may have deleted your speakerphone pairing connection
in your mobile phone.
follow the pairing instructions.
Jabra SP700
13
I want to reset the pairing list on my speakerphone
-
The speakerphone registers a list of up to 7 mobile phones. To
remove the list, press and hold the answer/end button, volume
up button and fm button at the same time. a beep indicates
the list was removed from the speakerphone memory. The
next time you power on, the speakerphone will go into pairing
mode as the first time you powered your new SP700 on.
Will the Jabra SP700 work with other Bluetooth equipment?
-
The Jabra SP700 is designed to work with bluetooth mobile
phones. it can also work with other bluetooth devices that are
compliant with bluetooth version 1.1 or higher and support a
headset, hands-free and/or advance audio distribution profile.
I cannot use Reject call, call on hold, Redial or voice dialing
These features are dependent on the ability of your phone to
support a hands-free profile. even if the handsfree profile is
implemented reject call, call hold and voice dialling are optional
features which are not supported by all devices. Please consult
your device manual for details.
I can not connect speakerphone and radio via FM transmitter
-
make sure the radio is turned on and speakerphone is in fm
mode (fm Status icon is on).
-
if your radio when searching is not able to find the fm fre-
quency set by your speakerphone, the fm frequency must be
tuned in manually on the radio. Please read radio manual to
find out how to manually change frequency on your radio.
-
-
The sensitivity of the search function on your radio determines
whether it is able to find the frequency set by your speaker-
phone. on some radios you are able to adjust the sensitivity
thus making it possible to find the speakerphone frequency
when searching. if not tune in manually.
in urban areas it might be difficult to find a clear frequency. it
is therefore advisable to use a frequency in the lower or upper
end of the fm frequency band (e.g. 88.1 or 107,7 mhz) where
you will have the best chance to find a clear frequency.
Jabra SP700
14
neeD suPPorT?
1. Web:
(for the latest support info and online user manuals)
2. E-mail:
3. Phone:
support.uk@jabra.com
information: info@jabra.com
0800 0327026
Taking Care of your sPeakerPhone
-
always store the Jabra SP700 with the power off and safely
protected
-
avoid storage at extreme temperatures (above 45°C/113°f – in-
cluding direct sunlight – or below -10°C/14°f). This can shorten
battery life and may affect operation. high temperatures may
also degrade performance.
-
Do not expose the Jabra SP700 to rain or other liquids.
Warning!
never operate your SP700 speakerphone while driving!
remember always drive safely, avoid distractions and follow local
laws!
use caution while using your speakerphone when you are engag-
ing in any activity that requires your full attention. While engaging
in any such activity, turning your speakerphone off will keep you
from being distracted, so as to avoid accident or injury. Do not
take notes or read documents while you are driving.
Pairing and/or connecting your SP700 speakerphone with your
mobile phone or car stereo should always be completed before
you start to drive.
at the time of printing use of fm transmitter portion of this
product is restricted and/or prohibited in the following countries:
Cyprus, france, greece, hungary, ireland, italy, latvia, lithuania,
malta, montenegro, Poland, Serbia, Slovakia, and Slovenia. for an
Jabra SP700
15
Calls and music streamed to your fm radio using the fm transmit-
ter can potentially be picked up by another radio in close proxim-
ity. This is only relevant when using the fm transmitter mode.
never try to dismantle the product yourself. none of the internal
components can be replaced or repaired by users. only author-
ised dealers or service centres may open the product. if any parts
of your product require replacement for any reason, including
normal wear and tear or breakage, contact your dealer.
4. aCa TS028 – ignition of flammable atmospheres. Do not use the
speakerphone in environments where there is a danger of ignition
of flammable gases.
Jabra SP700
16
WarranTy
Limited Two (2) -Year Warranty
gn netcom a/S, warrants this product to be free from defects in
materials and workmanship (subject to the terms set forth below)
for a period of two (2) year from the date of purchase (“Warranty
Period”). During the Warranty Period, gn netcom a/S will repair
or replace (at gn netcom a/S’s discretion) this product or any
defective parts (“Warranty Service”). if repair or replacement is not
commercially practicable or cannot be timely made, gn netcom
a/S may choose to refund to you the purchase price paid for the
affected product. repair or replacement under the terms of this
warranty does not give right to any extension or a new beginning
of the period of warranty.
Claims under the Warranty
To obtain Warranty Service, please contact the gn netcom a/S
com for further information about customer support. you will
need to return this Product to the dealer or ship it to the dealer
its original packaging or packaging affording an equal degree of
protection. you will bear the cost of shipping the product to gn
netcom a/S. if the Product is covered by the warranty, gn netcom
a/S will bear the cost of shipping product back to you after the
completion of service under this warranty. return shipping will
be charged to you for products not covered by the warranty or
requiring no warranty repair.
The following information must be presented to obtain Warranty
Service: (a) the product, and (b) proof of purchase, which clearly
indicates the name and address of the seller, the date of purchase
and the product type, which is evidence that this product is within
the Warranty Period. Please further include (c) your return address.
(d) daytime telephone number, and (e) reason for return. as part
of gn netcom a/S/Jabra’s efforts to reduce environmental waste
you understand that the product may consist of reconditioned
equipment that contains used components, some of which have
been reworked. The used components all live up to gn netcom
a/S/Jabra’s high quality standards and comply with the gn net-
com a/S product performance and reliability specifications. you
understand that replaced parts or components will become the
property of gn netcom a/S.
Jabra SP700
17
Limitation of Warranty
This warranty is only valid for the original purchaser and will
automatically terminate prior to expiration if this product is sold
or otherwise transferred to another party. The warranty provided
by gn netcom a/S in this statement applies only to products
purchased for use, and not for resale. it does not apply to open
box purchases, which are sold “as is”and without any warranty.
Specifically exempt from warranty are limited-life consumable
components subject to normal wear and tear, such as microphone
windscreens, ear cushions, modular plugs, ear tips, decorative
finishes, batteries, and other accessories. This warranty is invalid
if the factory-applied serial number, date code label, or product
label has been altered or removed from this product. This War-
ranty does not cover cosmetic damage or damage due to misuse,
abuse, negligence, acts of nature, accident, disassembling or
modification of, or to any part of, the product. This Warranty does
not cover damage due to improper operation, maintenance or
installation, or attempted repair by anyone other than gn netcom
a/S or a gn netcom a/S dealer which is authorized to do gn
netcom a/S warranty work. any unauthorized repairs will void this
warranty.
rePairS or rePlaCemenTS aS ProviDeD unDer ThiS Warran-
Ty are The eXCluSive remeDy of The ConSumer. gn netcom
a/S Shall noT be liable for any inCiDenTal or ConSeQuen-
Tial DamageS for breaCh of any eXPreSS or imPlieD War-
ranTy on ThiS ProDuCT. eXCePT To The eXTenT ProhibiTeD
by laW, ThiS WarranTy iS eXCluSive anD in lieu of all oTher
eXPreSS anD imPlieD WarranTieS WhaT So ever, inCluDing
buT noT limiTeD To The WarranTy of merChanTabiliTy anD
fiTneSS for a PraCTiCal PurPoSe.
noTe! This warranty gives you specific legal rights. you may
have other rights which vary from location to location. Some
jurisdictions do not allow the exclusion or limitation of incidental
or consequential damages or implied warranties, so the above
exclusions may not apply to you. This warranty does not affect
your legal (statutory) rights under your applicable national or local
laws.
Jabra SP700
18
CerTifiCaTion anD safeTy aPProvals
CE
This product is Ce marked according to the provisions of the r
& TTe Directive (99/5/eC). hereby, gn netcom a/S, declares that
this product is in compliance with the essential requirements and
other relevant provisions of Directive 1999/5/eC.
Within the eu this device is intended to be used in austria, bel-
gium, bulgaria, Cyprus, Czech republic, Denmark, estonia, finland,
france, germany, greece, hungary, ireland, italy, latvia, lithuania,
luxembourg, malta, Poland, Portugal, romania, Slovakia, Slovenia,
Spain, Sweden, The netherlands, united kingdom, and within
efTa in iceland, norway and Switzerland.
Bluetooth
The bluetooth® word mark and logos are owned by the bluetooth
Sig, inc. and any use of such marks by gn netcom a/S is under
license. other trademarks and trade names are those of their
respective owners.
Jabra SP700
19
glossary
1. Bluetooth is a radio technology that connects devices, such
as mobile phones and headsets, without wires or cords over
a short distance (approx. 10 meters/33 feet). bluetooth is safe
to use. it is secure too, so once a connection has been made
no-one can listen in and there is no interference from other
bluetooth devices either. get more information at www.blue-
tooth.com.
2. Bluetooth profiles are the different ways that bluetooth
devices communicate with other devices. bluetooth phones
support the headset profile, the hands-free profile or both. in
order to support a certain profile, a phone manufacturer must
implement certain mandatory features within the phone’s
software.
3. Pairing creates a unique and encrypted link between two
bluetooth devices and lets them communicate with each other.
bluetooth devices will not work if the devices have not been
paired.
4. Passkey or PIN is a code that you enter on your bluetooth
enabled device (e.g. a mobile phone) to pair it with your Jabra
bTxxxx. This makes your device and the Jabra bTxxxx recognize
each other and automatically work together.
5. Standby mode is when the Jabra bTxxxx is passively waiting
for a call. When you‘end’a call on your mobile phone, the
headset goes into standby mode.
Dispose of the product according
to local standards and regulations.
Jabra SP700
20
TyPe: Jabra SP700
Made in China
©
2008 gn netcom a/S. all rights reserved. Jabra® is a registered trademark of
gn netcom a/S. all other trademarks included herein are the property of their
respective owners. The bluetooth® word mark and logos are owned by the
bluetooth Sig, inc. and any use of such marks by gn netcom a/S is under license.
(Design and specifications subject to change without notice).
|